Educational checklist examples for safety, equipment and operational tasks — what a checklist covers, who uses it and how it connects to forms, inspections and training. Informational only — template examples to adapt, not official documents or legal advice; completing a checklist does not guarantee compliance and employers remain responsible.
What a fire blanket checklist is
A fire blanket checklist confirms that fire blankets are in their designated places, accessible, in their containers, undamaged, and that the quick-release tabs are intact so a blanket can be deployed without delay.
This is an educational overview with a simplified example. It is not an official template — the employer decides where fire blankets are needed based on the fire risk assessment.
Purpose
- Confirm blankets are in place where small fires could occur.
- Check they are accessible and unobstructed.
- Verify the container and release tabs are intact.
- Record the check and flag any to replace.
Who completes it
- A competent person appointed by the employer — often a warden or area lead.
- With input from people who work in the area.
- The employer decides where blankets are provided.
- Defects are reported to whoever can act.
When it is used
- On the routine cycle the employer sets.
- After a blanket is used or reported damaged.
- When the layout or risk in the area changes.
- As part of broader fire checks.
Typical items
- Blanket present in its designated location and accessible.
- Container intact; quick-release tabs present and undamaged.
- No obvious damage, contamination or tampering.
- Signage present; area around it clear.
- Used or damaged blankets flagged for replacement.
- Example items only — adapt to your premises and risks.
Common mistakes
- Blanket missing, hidden or blocked when needed.
- A used blanket left in place rather than replaced.
- Damaged container or release tabs ignored.
- No signage so people cannot find it.
Document workflow
The fire blanket checklist sits alongside the fire extinguisher and fire safety checks and draws on the fire risk assessment, which identifies where blankets help. Use of a blanket feeds restocking and any incident record.
See the related documents below for what is commonly used with and completed after a fire blanket checklist.
Retention (high level)
Blanket checks are usually kept for a period alongside fire records, in line with the employer’s obligations. This page does not state a required period — confirm with the applicable law and the official authority.
Completing and sharing as a PDF
Blanket checks are commonly recorded and stored as PDFs in the fire log. Exporting to PDF supports the record; it does not make the check official or guarantee compliance.
Employer checklist
- Provide fire blankets where the assessment indicates.
- Keep them accessible, signed and undamaged.
- Replace used or damaged blankets promptly.
- Keep checks with the fire records.
Worker notes
- Know where the nearest fire blanket is and how to use it safely.
- Keep it accessible and report if it is missing or damaged.
- Only tackle a fire if trained and safe to do so.
Country considerations
Requirements for fire-fighting equipment vary by country, and the official authority differs. This page is general and high-level — not a statement of any country’s law and not a guarantee of validity.
Confirm current requirements with the official authority for your country and a qualified professional.
Who is responsible
The employer is responsible for providing and maintaining suitable fire-fighting equipment and for compliance. This page is an educational overview with a template example; it does not determine your provision and does not transfer responsibility.
Export, edit and share documents
The documents, policies and templates this involves can be exported, edited, signed, stored and shared as PDFs with the HELPERG PDF Editor.
Free, printable HR & employment resources
Practical, ungated resources to put this into action — no signup.