Educational checklist examples for safety, equipment and operational tasks — what a checklist covers, who uses it and how it connects to forms, inspections and training. Informational only — template examples to adapt, not official documents or legal advice; completing a checklist does not guarantee compliance and employers remain responsible.
What a concrete mixer checklist is
A concrete mixer checklist is a check before running a site mixer, focusing on the guarding around the drum and drive, the power supply and the machine’s stability, because the rotating drum, drive and the supply create entanglement and electrical hazards.
This page is an educational overview with a simplified example of what such a checklist usually covers. It is not an official template, not specific to any machine or jurisdiction and not legal advice — the employer decides what the check must include.
Purpose
- Confirm drum, drive and gear guards are fitted and secure.
- Check the electrical supply and protection, or the engine, fuel and exhaust.
- Confirm the machine is stable and on firm, level ground.
- Record the check and the PPE before mixing.
Who completes it
- The competent user, before use.
- Defects stop use until resolved.
- The employer decides who is competent to use the mixer.
- Electrical inspection and servicing are separate, competent-person tasks.
When it is used
- Before each use, especially for hired or shared machines.
- After the mixer is moved or the supply changed.
- When a guard, leak or fault is noticed.
- On the frequency the employer sets.
Typical items
- Machine type/ID, user, date and task.
- Drum, drive and gear guards fitted and secure.
- Electrical supply/RCD or engine, fuel and exhaust safe for the area.
- Stable, level base; controls working; PPE selected.
- Defects found and action taken (e.g. out of use, reported).
- These are example items only — adapt them to the machine and your risk assessment.
Common mistakes
- Reaching into the drum or near the gears while it runs.
- Using a machine with a missing drive or gear guard.
- Running an engine-driven mixer in an enclosed space.
- No RCD protection on a mains machine in a wet environment.
Document workflow
A concrete mixer checklist follows the task risk assessment and sits alongside the machine pre-use check and electrical inspection records. It is used with the power tool and pressure washer checks for cleaning; a failed check is completed after by taking the machine out of use and reporting it, and an injury triggers an incident report.
See the related documents below for what is commonly completed before, used with and completed after a concrete mixer check.
Retention (high level)
Where checks are recorded, employers usually keep them for a period they set, alongside maintenance and electrical inspection records. Specific retention periods vary by jurisdiction and type of work.
This page does not state a required period — confirm retention with the applicable law and the official authority.
Completing and sharing as a PDF
Recorded checks are often stored as PDFs alongside the machine’s records. Exporting to PDF supports the record; it does not make the check official or guarantee compliance.
Employer checklist
- Provide guarded machines and electrical protection suited to the site.
- Ensure users are competent and machines are sited safely.
- Make sure defective machines are taken out of use.
- Keep checks and maintenance records together.
Worker notes
- Check the guards and supply before starting the mixer.
- Never reach into the drum or near the gears while it runs.
- Report and remove a defective machine rather than using it.
Country considerations
Most countries require employers to guard machinery, control electrical risk and provide safe work equipment, but the detail, terminology and record-keeping rules differ, and the official authority is different in each. This page is high-level and general — it is not a statement of any country’s law and not a guarantee that a checklist is valid anywhere.
Always confirm the current requirements with the official authority for your country and a qualified professional.
Who is responsible
The employer is responsible for providing safe, guarded machines, controlling the risks, ensuring competence and for compliance. This page is an educational overview with a template example; it does not certify a machine, does not replace training and does not transfer responsibility.
Export, edit and share documents
The documents, policies and templates this involves can be exported, edited, signed, stored and shared as PDFs with the HELPERG PDF Editor.
Free, printable HR & employment resources
Practical, ungated resources to put this into action — no signup.